One End of Link Without Auto-Negotiation

If Auto-Negotiation only exists at one end of the link, the Auto-Negotiation protocol is designed to detect that condition and respond correctly using a mechanism called Parallel Detection. For example, if a dual-speed 10/100 Ethernet interface with Auto-Negotiation is connected to a 10BASE-T hub that does not have Auto-Negotiation, the interface will generate FLPs but will only receive NLPs from the 10BASE-T hub. The Auto-Negotiation protocol in the interface will detect the presence of Normal Link Pulses and automatically place the interface in 10BASE-T mode.

Similarly, when an Auto-Negotiation hub with multiple capabilities on its ports is connected to an interface that only supports 100BASE-TX and is not equipped with Auto-Negotiation, the Auto-Negotiation protocol will set the hub port to operate in 100BASE-TX mode. Parallel Detection works for 10BASE-T as well as 100BASE-TX and 100BASE-T4 devices without Auto-Negotiation. Parallel Detection for 100BASE-TX/T4 checks the link signals being received for Link Monitor characteristics that are specific to a given mode. If Parallel Detection determines that exactly one mode of Link Monitor is satisfied by the incoming link signals, it connects to that mode.

Quick Reference Guide to Auto-Negotiation - 09 SEP 95

[Next] [Previous] [Up] [Top] [Copyright]

Generated with CERN WebMaker