next up previous contents index
Next: 1.8.4 Hard drive space Up: 1.8 Hardware Requirements Previous: 1.8.2 Memory requirements

1.8.3 Hard drive controller requirements

    You do not need to have a hard drive to run Linux; you can run a minimal system completely from floppy. However, this is slow and very limited, and many users have access to hard drive storage anyway. You must have an AT-standard (16-bit) controller. There is support in the kernel for XT-standard (8 bit) controllers; however, most controllers used today are AT-standard. Linux should support all MFM, RLL, and IDE controllers. Most, but not all, ESDI controllers are supported---only those which do ST506 hardware emulation.

The general rule for non-SCSI hard drive and floppy controllers is that if you can access the drive from MS-DOS or another operating system, you should be able to access it from Linux.

  Linux also supports a number of popular SCSI drive controllers, although support for SCSI is more limited because of the wide range of controller interface standards. Supported SCSI controllers include the Adaptec AHA1542B, AHA1542C, AHA1742A (BIOS version 1.34), AHA1522, AHA1740, AHA1740 (SCSI-2 controller, BIOS 1.34 in Enhanced mode); Future Domain 1680, TMC-850, TMC-950; Seagate ST-02; UltraStor SCSI; Western Digital WD7000FASST. Clones which are based on these cards should work as well.



next up previous contents index
Next: 1.8.4 Hard drive space Up: 1.8 Hardware Requirements Previous: 1.8.2 Memory requirements



Matt Welsh
mdw@sunsite.unc.edu